Metal Coating – Sepid Felez
We Are Served QualityIndustrial Coating
Metal Coating – Sepid Felez
.jpg)
Metal Coating – Sepid Felez
This special coating having both the characteristics of a primer and a top coat comes in a ready to use one pack This coating which is anti abrasive has a high resistance when exposed to Chemicals salty vaporous, and tough conditions. It has an excellent adhesion property to different surfaces .
Important Note
Please note that all Sepitaks products are solvent free .These products do not require any kind of thinner or hardener. It is recommended not to add any kind of solvents to Sepitaks
products
Tools used for applying can be washed with thinner.
SEALER
This sealer is solvent free and made of plastizole PVC base. Its ticsotropic property prevents it from greeding when applied in different thickness even on vertical surfaces. It has excellent adhesion property when applied on steel alloys or surfaces quoted by any primer.
It is very flexible and it has a high mechanical resistance. When the sealer is baked the surface will be flat enough for paint to be dispersed even on a baked sealer.
| Test | Standard | Test result |
| Product code | - | UD 6443 |
| Hue/color | - | Lemon yellow |
| Application method | - | Under pressure pumps with pressure proportion 1/12 or 1/24 or grease pump or trowel |
| Dry film thickness | - | 200 microns |
| Viscosity | - | 180000-20000 CP .BOOKFIELD RVT6 |
| Density | ASTM D1475 | 1.6 gr/cm3 |
| Time and degree of baking | ASTM D1644 | 130~180 C for 20 ~ 40 min. |
| Impulse | ASTM D2794 | 1 kg=> 0.5 m |
| Adhesion | ASTM D3359 | On ED primers => 5 B On ordinary two component primers => 5 B On bare steel alloys without coating => 4 B |
| Scratch | ASTM D3363 | 4 H |
| Bending | ASTM D1737 | 5 mm mandrel , DFT = 1 mm |
| Impulse | ASTM D2794 | 1 Kg=> 0.75 m |
| Humidity (250 Hrs.) | ASTM D4585 | Resistant |
| Submersion in water ( 400 Hrs.) | ASTM D870 | Resistant |
| Salt spray (400 Hrs.) | ASTM B117 | Resistant |
| Packing | - | 220 kg drums |
| Storage | - | 6 months – away from direct sun rays in 15~25 C |
Important Note
Please note that all Sepitak products are solvent free .These products do not require any kind
of thinner or hardener. It is recommended not to add any kind of solvents to Sepitak products
Tools used for applying can be washed with thinner
